Civil 3D Beautiful

Recently I was in an installation support call with a customer that was getting the above message after installing AutoCAD 2018... I tried everything listed in these articles: AutoCAD: The License manager is not functioning or is improperly installed AutoCAD: The License manager is not functioning or is improperly installed(Part 2) Did a full Clean Uninstall . None of those things worked.  Finally what it works was, completely removing C++ from the machine through the Control Panel and installing them again from the software installation folder (my case BDSP 2018): C:\Autodesk\(Autodesk_Software)\3rdParty\x86\VCRedist   Install each one of them top to bottom   C:\Autodesk \ (Autodesk_Software)\ 3rdParty\x64\VCRedist Install each one of them top to bottom After that everything worked as expected. Thank you Sebastian Guevara from the Autodesk Installation & Licensing Department

Have you ever wonder why if you import an FBX file from any of the available sources like SketchUp, FormIt, any AutoCAD Based software, Revit, Navis to name some of them in InfraWorks regardless of the file units the results are all over the place, sometimes it works, sometimes it doesn't, but must of the time the object or objects are in the wrong size...????  Well, I took the time to do some comparisons between an export from AutoCAD, FormIt, and SketchUp to the most used file formats Collada (.DAE), .FBX and .OBJ and the way they behave when you import them in InfraWorks as a 3D Models or if you create a 3D Model Style with the same file types... I worked with a 10-foot Cube, simple and symmetrical geometry for testing porpuses. Here are my findings... If you import the same Cube created and exported out from the above-mentioned software into InfraWorks and configure the files as a 3D Models, this is what you get... Now using the same files side by side as 3D Models vs 3D M...

I was asked if it was possible to edit the dimensions of the Curb and Gutter on the component road because those parameters show grayed out from within InfraWorks and the dimensions needed to be like a Type F Curve and Gutter, as shown below…   Here it is how you can make this work… Go to: C:\ProgramData\Autodesk\InfraWorks\LocalLibrary\Styles\ComponentDefinition And look for the file called Curb & Gutter.ACItem (always make a copy of the original in case something goes wrong and rename it Curb & Gutter.ACItem.bak ).  Select the file, right click on it and go to Edit. This will open the file on the Notepad. Please note that the parameters on this file are in meters, so conversion will be needed to resize this properly. Once you are there, make the changes accordingly, this image will illustrate this better… Each parameter is represented with a different color, the corresponding units are located at the left and the conversion to meters is shown between the brackets....

Hello everybody, because I been asked this question a lot in the last 2 weeks I decided to write a post about it... This is what you need to do if you want to work with CSV files to use the Geotechnical Module... 1. The .CSV files must keep that same name configuration 2. The heather of the files has to match exactly what the Geotechnical Module sample file has: name, space, and order. 3. You must have the mandatory fields for each file If you take care of this everything will work as expected

Hi everyone... Autodesk just released a hotfix for the Geolocation Online Maps... Microsoft® is ending support for version 7 of Bing® Maps on June 30th, 2017. This Hotfix will upgrade your version of Bing Maps to version 8 so that you can continue to use the Geolocation Online Map Data feature. This Hotfix applies to all 32-bit and 64-bit publicly released versions of the following products (including Service Packs and Updates): Autodesk AutoCAD 2015, Autodesk AutoCAD LT® 2015, and Autodesk AutoCAD 2015-based vertical products Autodesk AutoCAD 2016, Autodesk AutoCAD LT 2016, and Autodesk AutoCAD 2016-based vertical products Autodesk AutoCAD 2017, Autodesk AutoCAD LT 2017, and Autodesk AutoCAD 2017-based vertical products Autodesk AutoCAD 2018, Autodesk AutoCAD LT 2018, and Autodesk AutoCAD 2018-based vertical products Downolad and install the hotfix, please remember refear to the README file for detailed instructions. Autodesk® AutoCAD® 2015-2018 Geolocation Online Map Hotfix

Hello everybody... Autodesk released a new version of Design Review, unfortunately, this new version doesn't allow you to add a digital signature to your DWF, for some government entities this is a must have, so if you updated to the new version you will need to rollback to the 2013 version in order to make it work. Sadly it is no way to get this from the Autodesk website, so here is a link that you can get it from... Autodesk Design Review 2013 installer

Hi, all... This time I would like to share some InfraWorks Fence and Barrier Styles... InfraWorks Fence and Barrier Style - Safety Fence InfraWorks Fence and Barrier Style - Iron Fence And here is a short video that shows how to create a fence and barrier style using a transparent PNG image...

Hi all... This time I just want it to show you some cool studies that you can do with InfraWorks like Mobility Simulation... Here is a site and parking done in Civil 3D with a Revit building, and this mobility simulation shows how people gets in and out the building and the parking lot and how traffic gets affected by this new site... Enjoy!

Hello, everybody... I just want it to share one of my favorite features of InfraWorks 2018. If you work with a lot of trees on your model you will love this.... InfraWorks 2018 has now the ability to work with Simplified Trees... Disable realistic trees in your views... Enabling and disabling realistic trees is a simple toggle switch within your view settings. Working a simplified style of trees will consume few resources and will allow you to see objects behind the trees. Take a look at this video courtesy of Autodesk Infraworks Youtube Channel:

Hello everyone… With the introduction of a New File Format and Feature Format on Autodesk ® AutoCAD ® Civil 3D ® 2018 Interoperability Between Versions is, as usual, a hot topic… Here are a couple of things you need to know… Objects in a drawing saved in AutoCAD Civil 3D 2018 are available only as proxies when the drawing is opened in a prior version of the software. Within AutoCAD Civil 3D 2018, set the PROXYGRAPHICS drawing setting to 1 to save the graphics with the drawing, otherwise, a bounding box is displayed where the object is located when the drawing is opened in a prior version of the software. Hope this will help!

Hi everyone... In previous versions of Windows, you had to use an administrator account to do certain things, such as changing system settings or installing software. If you were logged on as a limited user, the Run as command eliminated the need to log off and then log back on as an administrator. Since Windows 7, the Run as command has been changed to Run as administrator . In Windows 8.1 and Windows 10, it seems that something changed on the permission protocols of Windows and if you launch your Autodesk software with " Run as administrator " you will run into some issues. - The first one of them is the inability to Drag and Drop files into the application because this function is prohibit, like SHP files to name some of them in AutoCAD Civil 3D or Map 3D or any type of drag and drop data in InfraWorks 360. ( Video ) - The second one is the inability to access your Mapped Network Drives from within the software, because they don't show under the Microsof...

Hello everyone... This time I would like to share how using Autodesk Shared Reference Point for Civil 3D and Revit, you will be able to assign true coordinate system to your Revit Model and use that information to locate your building on a real content information model in InfraWorks 360 as well. The Autodesk® Shared Reference Point extension provides functionality to export known points and elevation from AutoCAD Civil 3D to an external file, in which Revit can import and setup a ‘Shared Coordinate System’. This enables the collaboration of exported RVT, DWG and NWC files back to AutoCAD Civil 3D and to coordinate models in Autodesk Navisworks. Key Features of this Extension Autodesk® Shared Reference Point consists of the following features: Two individual installations for AutoCAD Civil 3D and Revit Export coordinates and elevation from AutoCAD Civil 3D to external .xml file Import .xml into Revit based on same known positions and create a ‘Shared Coordinate System’

Hi there.... This time I will like to show you how to fix the very annoying Microsoft association file error message. The issue is that when you double click in any DWG file you get this error message:   Here is how to fix it: 1. Go to: C:\Program Files\Common Files\Autodesk Shared\AcShellEx 2. Select the file call AcLauncher.exe and right click on it. 3. Go to Properties -> Compatibility Tab -> Change settings for all users. 4. And select Run this program as an administrator , click Apply and OK until you exit the Properties window.  5. Then select one of your DWG files, right click on it and go to Open with -> Choose another app 6. Select the AutoCAD DWG Launcher and make sure that you the box Always use this app to open .dwg files and click OK. After this you should be able to open any DWG file double clicking on it without getting any error message.

We had couple of customers calling about their AutoCAD’s freezing up at multiple times randomly during the day; after trying multiples things, here are the changes we did to make it work: 1. Autodesk software needs full permission to:   Registry Entries: HKEY_CURRENT_USER\SOFTWARE\AUTODESK HKEY_LOCAL_MACHINE\SOFTWARE\AUTODESK   Folders: The folder the program was installed in, such as: C:\program files\Autodesk\AutoCAD 201x (for example)   Windows 7 / Windows 8 / Windows 10: C:\Users\All Users\Autodesk C:\Users\\AppData\Local\Autodesk C:\Users\\AppData\Roaming\Autodesk C:\Program Files\Common Files\Autodesk Shared   2. Disable “Show Home Base on Startup” in the Registry Editor: HKEY_CURRENT_USER\Software\Autodesk\DirectConnect\RegistryVersion20.0\System\Preferences\File Look for:  ShowHomeBaseOnStartup and change it to cero (0)

InfraWorks 360 2016.3 has been released... The September release include cool new features and enhancements. Here is an update overview video courtesy of  Eric Chappell, Autodesk Community Evangelist for InfraWorks 360:   You can find more information on the Autodesk InfraWorks 360 Video Library . 

It is very important to know that Windows 10 it is NOT Supported by any Autodesk software yet . This may change as Autodesk release any specific service pack to address this. As instated on the Autodesk Knowledge Network: Windows 10 support for Autodesk products Jul 29 2015 Issue: You want to know which Autodesk products are supported on Microsoft® Windows® 10. Note: Unless indicated otherwise, this information applies to only the 2016–2013 versions of all Autodesk products. Autodesk product versions of 2012 and earlier are no longer supported and are not included in considerations of Windows 10 compatibility. Solution: Windows 10 is not yet an officially supported operating system across the Autodesk product line. Autodesk intends to support many of our key products on Windows 10 and will add products to the list of products supported on Windows 10 as updates and future versions are released. Product Support will assist customers who have issues with current Autodesk...